Mud Bucket: Hydraulic and Pneumatic Type

Master Bushing
Casing Bushing
Roller Kelly Bushing
Bit Breaker
Bit & Stabilizer Gauges
Mud Bucket Manual type
Mud Bucket Hyd. / Pneumatic
Rotary Slips
Drill Collar Slips
Casing Pipes Slips
Tong Dies & Slip inserts
Safety Clamps Manual type
Safety Clamps Hydraulic type
Power Slip Lifter
Bushing Hose Protector
Wear Guide Assembly
Adapter Plate for Tubing Spider
Adapter Plate for Bit Breaker
Drift Casing & Tubing
JOT Supply Range
Bin for Barrel, Drill Pipe, Tools
Master Bushing    |    Casing Bushing    |    Roller Kelly Bushing    |    Bit Breaker    |     Bit Gauges
   Mud Bucket   |    Rotary Slips   |    Drill Collar Slips    |    Casing Pipes Slips    |    Tong Dies
   Safety Clamps   |    Power Slip Lifter   |    Other Product    

JOT manufactures Hydraulic and Pneumatic operated Mud Buckets; size 6 Ft long suitable for 2-7/8" to 5-7/8 & 2-7/8" to 6-5/8" tubular that replace the manually operated Mud Bucket. Bucket opening & closing operated by Hydraulic or Pneumatic, also provided self locking system for safety at the time of operation. The extension arm enables extension and retraction of bucket between parked position and the well centre through Hydraulic or Pneumatic operation. When the mud has been drained from the bucket, with the help of operating lever the bucket clamps off and the extension arm retracts the bucket in parked position.

Hydraulic/Air operated Mud Bucket is an innovative mud bucket, designed for 100% drilling fluid recovery, it improves Drilling operations safely by preventing slick floors that eliminates the chances of slipping accidents on Rig Floors and also reduces crew clean-up time and cuts wash-water disposal volumes. JOT manufactured Mud Buckets are designed to increase safety, to improve working environment and better retention of expensive drilling fluids results in significant cost savings.

Technical Specifications:

JOT Model No.

MG 6L H ( Hydraulic)
MG 6L P ( Pneumatic)
Dimensions (L x W x H) 2000 x 800 x 2900 mm
79 x 31.5 x 114 inches
Range of Pipe sizes 2-7/8", 3-1/2", 4", 5", 5-1/2" & 5-7/8"
Time cycle(extension arm-retract) 15 seconds
Time cycle(Bucket open-close) 05 seconds
Time cycle(Extension arm-extend) 15 seconds
Drain hose size 6000 [19.7] mm [Feet]
Maximum Travel Length 2800 [9.2] mm [Feet]

Hydraulic Mud Bucket

Hydraulic Flow Q= min. 50 l/min (13gallon/min)
Working Pressure for Hydraulic 160 bar / 2320 psi (Minimum)

Pneumatic Mud Bucket

Working Pressure for Pneumatic 10 Bar / 145 psi
( Maximum )

Hydraulic and Pneumatic Type

Hydraulic and Pneumatic Type

Master Bushing| Casing Bushing | Roller Kelly Bushing| Bit Breaker| Bit Gauges| Mud Bucket| Rotary Slips | Drill Collar Slips| Casing Pipe Slips | Tong Dies | Safety Clamps| Power Slip Lifter | Other Product

Copyright © Janki Oil Tools 2008

Web solutions by : Dreamteam

Janki Oil Tools,Oil Well Drilling Components And Spare Parts,Oil Field Drilling Equipments, Master Bushing,Kelly Bushing,Tong Dies,Rotary Slips,Casing Pipes,Tractor Parts, Handicraft Items